1. GEOGNOSTICAL RESEARCHES

These researches focus on the analysis of the soil composition from the geotechnical point of view and through the extraction of modified and  unmodified  soil.They usually consist in surface surveys ditches, wells, drillings, penetrative tests and geophysical researches.Due to the difficult...
2. FOUNDATION PILES

Foundation piles  either convey the superstructure load to a deep and resistant subsoil layer through soft and unfit grounds, or they spread the weight of the construction to wide layers of the soil adequately resistant to the load. They are associated to particular foundation issues, to dangerous subsoil...
3. JET GROUTING

Jet-grouting is performed through different techniques, mainly through injections of  fluids varying from 1 up to 3. It is applied to loose soils, cohesive formation and decomposed rocks.The diameters of the resulting beams vary  according to the numbers of the fluids used: from 40 to 80 cm. diameter  if...
4. MICRO-PILES

Though included in the drilling piles category, micro-piles are particularly used to consolidate the foundations of existing structures. Their diameter varies from 6 to 35 cm. and they can be performed either vertically or sloping by perforating the foundation to be consolidated and by taking away the soils...
6. SHEET-PILING

Sheet-pilings are a particular group of piles formed by isolated elements fixed onto the ground, yet connected one another in order to form an uninterrupted bulkhead, sideward pressure resistant. Sheet-pilings can be built in wood, iron, (Larssen type) or in reinforced concrete, either built out of the...
7. LOAD TEST ON PILE

The load test analyses the altering behaviour of pile-soil compound for loads  up to 1,5 times higher  the operating load.The test is carried out by setting a hydraulic jack between the top of the pile and the existing foundation beam. A 3 cm. thick steel plate is set between the pile and the beam and an ...
8. INTERVENTION OF A SLOPE STABILIZATION

In a stabilization project, the geotechnical interventions adopted to increase the safety far beyond the limits provided by laws, are chosen according to the peculiarities of the physical -evolutional model of the real or  hypothetical instability and in relation to the elements distinguishing and causing...
9. SICC PILE

Drilling execution is performed through a particular hollow rode equipped with a coiled spire whose ratio between wing height and the rod diameter varies between 20% and 35% . They combine thrust and rotation actions set on the operating machine. During the drilling performance, a compression of the soil ...
10. WORKS IMPROVING THE GEOTECHNIQUES FEATURES OF THE SOILS

These works improve the cut resistance of the material by increasing its cohesion and/or friction. - injections of consolidation mixtures - chemical stabilization - electroosmosis and electrosilicate-action - freezing - spritz beton and gunite
11. TIE-RODS, NAILS AND BOLTS

These techniques are generally used to stabilize stony slopes, subject to  falling or collapsing, or they can be also combined with the building of walls and bulkheads.Tie-rods are elements of  the frameworks operating  in traction and able to empower the material.A tie-rod is made by a head and a...
12. ENVIRONMENTAL DRILLINGS

The greater  importance of environment preservation and its related studies of contaminated and polluted sites has remarkably increased the interest in environmental drillings  supplying fundamental information about status and causes of the environment pollution.Current laws have established the actions...
15. DRAINING WORKS

Draining interventions remove and collect  surface and underground waters near unstable slopes, in order to prevent the increase of interstitial pressures. SURFACE DRAINING WORKS- Surface small ditches remove from landslide areas the surface waters especially the stagnant waters, within the depression...